High-Quality CIPP Lining and Relining in Indianapolis, IN, and Surrounding Areas
Avoid unwanted digging in your yard during pipe repairs by taking advantage of SLB Pipe Solutions’ single access pipe relining system technology to repair your existing main line as well as your building service laterals. We proudly cater to the following locations:
With minimal disturbance to your home, business, or facility, SLB Pipe Solutions can repair existing pipes between 2-18” in diameter within 24 hours.
Cured-in-place-pipe can negotiate 22 degrees, 45 degrees, and most hard 90-degree bend easily and efficiently.
No matter the lining application, we have a solution that will work for you. If you don’t see it in the list below just let us know. We assist with any of the following applications:
- Lining of cement slab pipes
- Lining of water foundations
- Main lining, including sanitary and storm lining
- Lining of your vertical roof drain
- Lateral lining of sanitary storm main lining
- Lining of chilled water system pipes
- Some boiler discharge and return lines
- Reinstate lateral connections without removing the robotic cutter
How Does Cleaning, Inspection, and Lining of Pipes with Zero Digging Work?
We use our high-pressure water jetting equipment to clean out existing host pipes before a comprehensive video pipe inspection is used to determine whether your pipes are suitable candidates for cured-in-place pipe. Using a polyurethane or polypropylene-coated liner saturated in resin, we expand your pipes in-place without requiring extensive digging and using only air, steam, or water.
The resin, which consists of either epoxy or polyester, is cured in place during the process of expansion due to the heat of air, steam, or water. We follow this process with another video inspection to examine the results and to make any changes that may be necessary. This newly restored piping is long-lasting and will stay in place without requiring additional repairs for at least 50 years.
This low-risk process removes the need to conduct excavation or digging which risks damaged to underground utilities and restoration of ground surfaces and hardscapes, saving you up to 75% of costs that excavation or open-cut methods can cause. This safe and reliable method reduces the carbon footprint it takes to repair your sewer line and can be done in one day.
SLB Pipe Solutions offers a single access pipe relining system to rehabilitate the existing mainline and building service laterals without the need for extensive digging.
Our pipe rehabilitation crews can rehabilitate pipelines from 2″ to 18″ in diameter in less than a day with minimal disturbance to your home, business, or facility.
We have a long list of diversified lining applications. If you don’t see it in the list below just let us know!
Here are some of the most common applications:
- Sanitary and Storm Main Lining
- Water Fountain Lining
- Vertical Roof Drain Lining
- Cement Slab Pipe Lining
- Electrical Conduit Lining
- Sanitary Storm Lateral Lining
- Chilled Water System Pipe Lining
- Some boiler discharge and return lines
- Reinstate lateral connections without the remote robotic cutter
Fix Your Sewer Line in One Day!
First, you need a camera inspection. Before any pipe lining project, the pipe in question must be properly inspected to properly asses the condition of the pipe. The camera inspection is the first, most important step to repairing your sewer line. Our pipe inspection service provides a video of the existing condition of the line, the approximate length, and will show any trouble we might have with installing the CIPP.
After the sewer inspection, the pipe will be cleaned from all debris and roots by using our drain cleaner or hydro jetters. The existing line will need to be free of any debris or roots to provide a smooth surface for the liner to adhere to.
Once the line is completely cleaned and repaired, the liner is ready to be installed. The CIPP liner is inverted using air or water into the existing line. Once installed the liner is inflated with a calibration tube using water, steam, or air until the liner hardens, in most cases about 3 hours. After the line is fully cured out, the calibration tube is removed and the brand new CIPP, pipe within a pipe remains. The CIPP provides a structural repair for broken, cracked, or missing pipe sections and eliminates future root intrusion. Guaranteed manufacturer’s warranty for 50 years!
Finally, after the cured-in-place pipe is installed, the post camera inspection is performed. This will ensure the liner was installed properly and will be provided at the end of the job.
All SLB Pipe Solutions employees carry certification for Perma-Liner Industries materials and installation processes and have successfully passed the manufacturer’s three-day quality workmanship course. Our lining products carry NSF, IAMPO, and ICC-PMC approval. All of our products are widely accepted and carried out in accordance with residential and international plumbing code.
At SLB Pipe Solutions, our pipe lining company in Indianapolis, IN takes pride in what we do and how we do it. We make it a point to extend our services to whoever needs it in Indiana, including Anderson, IN, and several other key locations. Get in touch with our team whenever you need:
- CIPP Pipe Lining Indianapolis, IN
- Pipe Lining Indianapolis, IN
- Cast Iron Pipe Lining Indianapolis, IN
- Sewer Pipe Lining Indianapolis, IN